当前位置:首页 > 公司简介
公司简介
江苏保捷锻压有限公司
前身是上海保捷汽车零部件锻压有限公司(原上海汽车齿轮二厂),始建于1989年,是上汽集团齿轮总厂下属的专业锻造及车加工工艺的园区企业。
Shanghai Baojie Automobile Components parts Forging Co., Ltd before (Shanghai automobile gear NO.2 work) which is an enterprise in the park under Shanghai Automobile Group,specializing in forging machining.
 
江苏保捷锻压有限公司于2011年新建,位于江苏省太仓市浏河镇。
Jiangsu Baojie establish in 2011,located in Liuhe Town, Taicang,Jiangsu province.
 
点图片看高清图:
 
点图片看高清图:
 
公司目前拥有AMP30、AMP50各一台,主要生产产品为AT行星轮、太阳轮及MT、DCT部分档位齿。 Baojie have one APM30 APM50. The main products are AT planet gears, sun gears some shift gears in MT DCT.
 
公司目前拥有400T高能,630T高能,1000T高能及1600T高能多台,并配置扩孔设备,主要生产MT档位齿、AT齿圈扩孔、AT驻车轮、MT主减及螺伞齿
Now we have several 400T,630T 1000T high-energy forging machines, configure the rolling equipments. The main products are MT shift gears, AT rolling sleeves, AT packing gears, MT driven gears spiral gears.
 
点图片看高清图:
 
公司目前拥有横轧机1台,630T摩擦压力机1台及1000T摩擦压力机1台,1600T摩擦压力机1台,主要生产类零件。
We have a wedge rolling machine, a 630T, a 1000T a 1600T Friction Press, produce shafts.
 
点图片看高清图:
 
研发中心概况:曾经是上海市市级锻造研发中心,现申请江苏省级研发中心。目前中心有研发人员42名,其中教授1名,高级工程3名,工程师8名, 采用 UG8.5 AUTOCAD DEFORM模拟等开发手段.
The introduction of R&D Center: We were own city level R&D Center fforgings in Shanghai before. Now we apply fthe Jiangsu provincial level R&D center. There are 42 research staff in center,1 professor,3 seniengineers, 8 engineer. Center adopt UG7.5, AUTOCAD, deform 3D etc. software.
 
点图片看高清图:
点图片看高清图:
 
点图片看高清图: